Stucco is the common name for a specific building material used in several applications. The original material, stucco, is made by mixing lime and sand to create a mortar-like consistency. However, many stucco contractors in Calgary can tell you there are different stucco mixes – like Stucco Quikrete. See what it’s all about down below!
What Makes it Different?
Stucco Quikrete is a mix that combines two materials: cement and sand. Originating from Portland, this cement-based stucco application is known for its easy mixture by adding only water.
Generally, Stucco Quikrete is used as a decorative colour and texture finish coat for stucco. Plus, it’s notably used for new construction and renovations applications.
How to Apply Stucco Quikrete
To apply it, you will also need to purchase a water-repellent coating. You can find this at your local hardware store or home improvement store. Also, you will need a trowel to help you spread the material evenly over the surface.
- Measure out your desired amount of water-repellent coating.
- Mix the cement and sand with enough water for a stiff consistency, about one gallon for every 25 pounds of cement.
- If you add too much water, add more sand to firm it up again.
Now you’re ready to apply the material!
- Spread it smoothly over the surface with your trowel and keep it about 1/4 inch thick when fully dry (which should take about an hour).
- Use a roller covered in plastic sheeting to smooth out any seams or bumps that might have formed while moving the material around during application.
- Then paint or seal with stucco coatings or other protective finishes.
Pros of Stucco Quikrete
While the ingredients in this product are cement, water, and sand, it doesn’t require a great deal of time to prepare. The mixture only needs to be mixed for about five minutes before it’s ready to be applied.
Another benefit of Stucco Quikrete is its ability to adhere well to any surface type. If you are looking for a material that can cover drywall, metal, or concrete surfaces, this stucco mix is perfect. It can also be used as an overlay on old stucco walls without first removing the old coating.
Cons of Stucco Quikrete
Stucco Quikrete is not a perfect material. The first downside to mention is the cost. Stucco Quikrete is not a cheap material to use. It’s quite expensive, making it difficult to cover large areas with this material. The second issue is the time it takes to dry. Stucco Quikrete takes a long time to dry, so you need to be cautious when installing it around pipes or other utilities that may not be accessible later on if the need for maintenance arises.
For stucco contractors in Calgary that you can trust, turn to Magnum Stucco. Our stucco repair, stucco painting, parging and EIFS stucco services are of exceptional quality, and our team is dedicated to delivering amazing service. We offer free consultations, and the owner-operator is involved with every project to ensure the best results. As a stucco company in Calgary that cares for its clients, we are available 24 hours a day, seven days a week. Plus, we are fully licensed, insured and registered with WCB, so you can have peace of mind when choosing Magnum Stucco. Call us today at (403) 400-3794 and get the exceptional service you deserve.